SFA brand pump for professional use with two motors

Pump for professional use with two SFA brand motors. SANICOM 2 is a gray water evacuation pump for use in small commercial units such as bars, restaurants, laundries, hairdressers, etc. It has 2 powerful motors of 1,500 W each, for greater safety. It can raise the waters up to 11 meters high or 110 meters away. This makes it easy to install a professional kitchen in a basement or away from the general building drain. It has an automatic starting system that works through a microswitch system: when entering the pump tank, the water displaces the air inside a detector, which starts the main motor. The pump has 2 low side inlets and one in the upper rear part. Tubes of diameter 40 or 50mm can be connected. To these inputs, you can connect appliances such as dishwashers, dishwashers, washing machines, glass washers, etc. The pump is designed to withstand water up to 90º together with intensive use. Of course, other types of devices such as sinks, showers or bathtubs can be evacuated. Wastewater evacuation is carried out by means of a 50 mm diameter section tube. The supplied evacuation elbow is pre-equipped with a non-return valve. For optimal installation, we recommend the installation of shut-off valves on both the inlet and outlet pipes. It is essential that the appliance is ventilated. For total safety, it has a 2nd motor that will start forcibly if the water in the tank reaches too high a level. It also has an external alarm that allows monitoring the operation of the device.