Thermostatic electronic built-in shower tap with DOMO TOUCH-DT PRESTO

Built-in thermostatic electronic tap with battery CR-P2 6V lithium DOMO TOUCH-DT PRESTO . Components integrated into the faucet to facilitate installation and increased vandal protection. This tap helps save water and energy. It has an automatic closing of the solenoid valve in case of power failure. The inlet and outlet is male 1/2 ". By means of a communication LED it indicates if the battery is low. The inner element is made of high sensitivity wax mounted in its sealed cartridge. The temperature can be regulated between 20ºC to 60ºC, with 8 l / min flow regulator and with the possibility of positioning the regulation knob with temperature stop. The dynamic supply pressures must be nominally equal, the recommended operating pressures are between 3 - 5 bar. The minimum dynamic pressure must be 0.5 bar, the maximum dynamic pressure must be 6 bar and the maximum static pressure must be 10 bar The tap is supplied with an anti-vandal fixing system with security screws and is programmed at the factory.